CCMC Metadata Registry (CMR) |
|
Go to: |
PBMOD (6.3)Physics Based MODels - Time-Dependent Model of The Global Low-Latitude Ionosphere, Plasma Irregularities, and Radio ScintillationModel DescriptionThe PBMOD ionospheric model is a system of Physics Based MODels that describes the three-dimensional time-dependent evolution of the low-latitude ionosphere on several different spatial scales: globally it provides the plasma density and composition at altitudes between 90 and 2000 km; at finer scales it describes the development of fluid plasma turbulence within this region and the resulting radio scintillation. The numerical model of the ambient (global scale) ionosphere yields density distributions for electrons and several ion species (O+, H+, and NO+, O2+, N2+) as a function of latitude, longitude, and altitude on a prespecified spatial grid at specified times. The system also includes models that evaluate the growth rate for the generalized Rayleigh-Taylor instability, perform evolutionary calculations of the self-consistent nonlinear development of equatorial low-density plasma plumes/bubbles, and perform a phase-screen calculation to estimate the strength of amplitude and phase scintillation of radio signals passing through the turbulent structure. Numerous physical and chemical processes are contained in the model, including field-aligned diffusion, cross-field electrodynamic drifts, thermospheric winds, ion production due to EUV radiation, chemical and other collisional processes. The model uses the IGRF geomagnetic field model for an accurate depiction of the Earth's magnetic-field geometry. Depending on the inputs, the global ionospheric model can describe different solar cycle, seasonal, and daily variations. It can describe the low-latitude effects of geomagnetic storm dynamics. Model Figure(s) :Model Inputs DescriptionThe main global inputs are the neutral densities, temperatures, and winds; the magnetospheric and equatorial electric field distributions and histories; the plasma temperatures; the plasma production rate; and the seed perturbation for the plume calculation. The empirical or statistical models used for these inputs are parameterized by: F10.7 (10.7 cm solar radio flux): data can be found at CCMC data generation pages or ftp://ftp.sec.noaa.gov/pub/latest/ Global geomagnetic disturbance indices, Ap and Kp. For storm simulations, the temporal variation of the magnetospheric and atmospheric inputs must be specified. Simple scalings with the interplanetary electric field (that can provide a rough estimate of the penetration field and thermospheric energy input in storm events) are provided by Solar-wind parameters measured on the ACE satellite Model Outputs DescriptionNmF2 hmF2 TEC (Total Electron Content) Number densities: O+, H+, sum of minor molecular ions, and electron (m-3) Rayleigh-Taylor Growth Rate Scintillation index (S4) for vertical propagation: UHF S4: for UHF (250 MHz) signal, L-band S4: for L-band (1500 MHz) signal. Model Caveats1. To a large extent, the reliability of the calculated ionospheric parameters depends on the accuracy to which the global inputs have been specified. The ambient ionospheric model is particularly sensitive to the equatorial electric field (including both penetration and dynamo fields), but also depends on thermospheric winds, neutral densities, plasma temperatures, and plasma production rates. 2. The plasma plume model depends on the parameters in 1, and is additionally dependent on the choice of 'seed' or initial perturbation for plume development. 3. The structuring of the plasma in the turbulent plumes does not feed back into the ambient model. Change LogModel Acknowledgement/Publication Policy (if any)Model Domains:Global_IonosphereSpace Weather Impacts:Ionosphere variability (navigation, communications)Phenomena :Ionospheric_ScintillationsSimulation Type(s):Physics-basedTemporal Dependence Possible? (whether the code results depend on physical time?)falseModel is available at?CCMCSource code of the model is publicly available?falseCCMC Model Status (e.g. onboarding, use in production, retired, only hosting output, only source is available):productionCode Language:Regions (this is automatically mapped based on model domain):Earth.NearSurface.IonosphereContacts :John.M.Retterer, ModelDeveloperMin-Yang.Chou, ModelHostContact Jia.Yue, ModelHostContact Acknowledgement/Institution :Relevant Links :Documentation: https://ccmc.gsfc.nasa.gov/static/files/PBMOD-Text.docxPublications :Model Access Information :Access URL: https://ccmc.gsfc.nasa.gov/requests/IT/PBMOD/pbmod_user_registration.phpAccess URL Name: Runs-on-Request Repository ID: spase://CCMC/Repository/NASA/GSFC/CCMC Availability: online AccessRights: OPEN Format: HTML Encoding: None Linked to Other Spase Resource(s) (example: another SimulationModel) : |
Curator: Chiu Wiegand | NASA Official: Dr. Masha Kuznetsova | Privacy and Security Notices | Accessibility | CCMC Data Collection Consent Agreement |