CMR Header

CCMC Metadata Registry (CMR)

Menu Page

Go to:

 CMR: View Simulation Run Info

CIMI/20200203/ROR/Santana_Despon-Solina_100224_IM_7

Run Description 

CCMC ROR run for CIMI 20200203 with RORID Santana_Despon-Solina_100224_IM_7

Simulation Time:

Simulation Start Time: 2008-09-03T00:00:00Z
Simulation End Time: 2008-09-05T00:00:00Z
Time Step in second: 900
Simulation Time Description:
Simulation Time Caveats:

Temporal Dependence (whether the outputs of the simulation code are time-dependent?): true

Regions:

Earth.Magnetosphere.RadiationBelt
Earth.NearSurface.Plasmasphere

Simulation Domain :

Contacts :

Santana.Despon-Solina, ModelUser

List of Run Input Parameter Grouping and their associated properties :

Name Description Caveats Properties
Settings for the model 
Settings used to run the model
Name Description Caveats Units Default Value or Actual Value Valid Min Valid Max
with_plasmasphere 
Flag indicating whether to conduct the run with (1) or without (0) Plasmasphere
 1
magnetic_field_model 
Specifies a magnetic field model to be used for the run
 TS04
KP_type 
Type of Kp data (definite or provisional or realtime or user-uploaded)
 provisional
type_of_F107_data 
Type of F10.7 data (Kp_3h or corrected_fluxdata)
 NOAA/Kp_3h
despike_solar_wind_data 
Flag indicating whether to automatically de-spike solar wind (optional for automatically retrieved data only; use when solar wind data shown in next page have clusters of extreme values in plasma density, temperature or velocity).
 False
despike.threshold 
De-spike threshold (standard deviations)
 sigmas 3 2 4
despike.number_of_samples 
De-spike length (number of samples in cluster of extreme values to be eliminated)
 7 3 9
b_abs 
Magnitude of IMF
 2.82
b_angle 
IMF clock angle
 -38.37
ionosphere_electric_field_model 
Specifies a High-Latitude Ionosphere Electric Field Model to be used for the run
 Weimer-2000
sw_link 
Solar wind link
 plot
SW_density_floor_was_applied 
Flag indicating the solar wind density has been floored with SW_density_floor value to ensure that the model will run through the requested time interval.
 False
minimum_SW_Fast-Mode_mach_number 
Minimum solar wind Fast-Mode mach number
 3.14
SW_parameters_are_large 
Flag indicating whether solar wind velocity, density or dynamic pressure are large. If they are, the run is a special request requiring attention by CCMC staff. The variables will be accepted unless they exceed certain absolute maximum values.
SW_plot 
Name of solar wind plot
 Santana_Despon-Solina_100224_IM_7_sw.gif
dipole_tilt 
Dipole tilt
 deg 4.39225
dipole_tilt_y 
Y component of dipole tilt
 deg -12.6907
with_UB_chorus_diffusion 
Specifies whether to use (1) or not use (0) Upper-Band Chorus in Wave loss mechanisms (electrons only)
 0
with_LB_chorus_diffusion 
Specifies whether to use (1) or not use (0) Lower-Band Chorus in Wave loss mechanisms (electrons only)
 1
with_hiss_diffusion 
Specifies whether to use No Hiss Diffusion(0) or UCLA Hiss Diffusion (2) in Wave loss mechanisms (electrons only)
 0
Dst_start 
Starting value of Dst in supplied Dst index file
 0
Dst_min 
Minimum value of Dst in supplied Dst index file
 -3
Dst_max 
Maximum value of Dst in supplied Dst index file
 19
Kp_start 
Starting value of Kp in supplied Kp index file
 0.33
Kp_min 
Minimum value of Kp in supplied Kp index file
 0.33
Kp_max 
Maximum value of Kp in supplied Kp index file
 5.66
AE_start 
Starting value of AE in supplied AE index file
 10.00
AE_min 
Minimum value of AE in supplied AE index file
 3.00
AE_max 
Maximum value of AE in supplied AE index file
 1586.00
AU_start 
Starting value of AU in supplied AU index file
 12.00
AU_min 
Minimum value of AU in supplied AU index file
 4.00
AU_max 
Maximum value of AU in supplied AU index file
 567.00
AL_start 
Starting value of AL in supplied AL index file
 2.00
AL_min 
Minimum value of AL in supplied AL index file
 0.00
AL_max 
Maximum value of AL in supplied AL index file
 1197.00
AO_start 
Starting value of AO in supplied AO index file
 7.00
AO_min 
Minimum value of AO in supplied AO index file
 0.00
AO_max 
Maximum value of AO in supplied AO index file
 431.00
dipole_time 
Dipole time
 2008/09/03 00:00
Solar wind inputs 
Time-dependent solar wind plasma and magnetic field inputs.
 Solar wind inputs are derived from a single spacecraft usually 200 R_E upstream of the sun-ward (front) simulation box boundary.
Name Description Caveats Units Default Value or Actual Value Valid Min Valid Max
solarwind 
Flag indicating whether solar wind data are constant (initial values) or variable (var).
 var const var
sw_source 
Name of the spacecraft or data source used to generate solar wind input information. Currently one of ACE-RT ACE-L2, WIND, OMNI, DSCOVR (real time)
 User-submitted data may be from any source or made-up. WIND
constant-Bx 
Constant Bx value fed into the front boundary of the simulation.
 nT -0.387
Bx 
Sun-Earth component of solar wind magnetic field.
 Bx is usually held constant (zero or average of observed values) to conserve div.B at the front boundary. Alternatively, oblique phase fronts can be assumed that update solar wind conditions along those fronts throughout the front boundary. Bx is then approximated as a linear combination of time dependent By and Bz. nT -0.387 -100 100
By 
Dawn-dusk component of solar wind magnetic field.
 nT -1.753 -100 100
Bz 
North-south component of the solar wind magnetic field. B_z is most important magnetic field component to drive or inhibit geomagnetic activity. Other components play a role in connection with the orientation of the Earth's dipole field.
 nT 2.214 -100 100
Vx 
Sun-Earth component of solar wind velocity.
 Low solar wind speed (less than 200 km/s in magnitude) usually indicates poor statistics in the solar wind plasma measurements. km/s -308.508 -3000 -200
Vy 
Plasma velocity in dawn-dusk direction.
 The orbital velocity of Earth (about 29 km/s) is usually neglected. km/s -2.54 -500 500
Vz 
Solar wind plasma velocity in north-south direction.
 km/s 3.199 -500 500
N 
Solar wind plasma density.
 Mass density described in terms of number of protons per cubic centimeter. AMU/cm^3 2.707 0.1 100
T 
Solar wind plasma temperature.
 Derived from observed distribution of solar wind particles. Can fluctuate widely when density N is at or below 1 AMU/cm^3. K 26236.2 10000 2000000
SW density floor 
Lowest value of N applied during pre-processing of solar wind input data.
 The density floor in the solar wind varies by magnetosphere model and it's numerical stability. A similar floor may be imposed inside the magnetotail lobes where the density may drop lower than in the solar wind. AMU/cm^3 0.01 0.1 2.5
Ionosphere conductance model 

						
						
						
												 
						
							

								
									

										Name
										Description
										Caveats
										Units
										Default Value or Actual Value
										Valid Min
										Valid Max
									

								
								
								
								

									iono_conductance
									
Parameter indicationg selection of conductance model in the ionosphere electrodynamics component of the model.

									The two models offered for run-on-request are constant (user sets Pedersen Conductance and Hall Conductance) and auroral (conducances driven by f10.7 and field-aligned currents from magnetosphere part of the model).
									
									auroral
									constant
									auroral
									
								

								
								

									f10.7
									
Solar irradiation index as represented by the flux of 10.7 cm (2800 MHz) radiation from the Sun measured in units of 10−22 W⋅m−2⋅Hz−1.

									Daily index of solar radiation that affects the daytime background conductivity in the ionosphere.
									sfu
									67.20
									50
									300
									
								

								
								
							

						
						
						
					

				
					

						Magnetosphere model parameters
						

						
						
						
												 
						
							

								
									

										Name
										Description
										Caveats
										Units
										Default Value or Actual Value
										Valid Min
										Valid Max
									

								
								
								
								

									inflow boundary
									
Location of sun-ward facing (front) boundary of the magnetosphere simulation box.

									
									R_E
									10
									24
									128
									
								

								
								
							

						
						
						
					

				
			
		

	

	

		Run Access Information
		
		:
	

	
	
	

		Keyword(s)
		
		:
	

	
		
			Geomagnetic storm

		
	
	
	

		Linked to Parent Spase Resource(s) (example: SimulationModel)
		
		:
	

	
	
		
							
				
					spase://CCMC/SimulationModel/CIMI/20200203

				
				
				
						
		
	
	
	
	

		List of Publications Referencing this Run  
		
		:
	

	
	


        		
    

    

        
            




CMR Footer





 



Curator: Chiu Wiegand |
NASA Official: Dr. Masha Kuznetsova |
Privacy and Security Notices |
Accessibility |
CCMC Data Collection Consent Agreement