CMR Header

CCMC Metadata Registry (CMR)

Menu Page

Go to:

CMR: View Simulation Run Info

MAGE/MAGE_CCMC_0.75/ROR/Baltazar_Gato_070924_1

Run Description

CCMC ROR run for MAGE MAGE_CCMC_0.75 with RORID Baltazar_Gato_070924_1

Simulation Time:

Simulation Start Time: 1998-01-06T14:00:00Z
Simulation End Time: 1998-01-08T02:00:00Z
Time Step in second: 60
Simulation Time Description:
Simulation Time Caveats:

Temporal Dependence (whether the outputs of the simulation code are time-dependent?): false

Regions:

Earth.Magnetosphere
Earth.NearSurface.AuroralRegion

Simulation Domain :

Contacts :

Baltazar.Gato, ModelUser

List of Run Input Parameter Grouping and their associated properties :

Name Description Caveats Properties
Model Components
Model components and version used to run the model
Name Description Caveats Units Default Value or Actual Value Valid Min Valid Max
GM_model
GM component
GM_version
GM component version
IE_model
IE component
REMIX
IE_version
IE component version
IM_model
IM component
RCM
IM_version
IM component version
1.0
RB_model
RB component
RB_version
RB component version
IT_model
IT component
IT_version
IT component version
Solar Wind Settings
Solar Wind Settings which include time-dependent solar wind plasma and magnetic field inputs.
Solar wind inputs are derived from a single spacecraft usually 200 R_E upstream of the sun-ward (front) simulation box boundary.
Name Description Caveats Units Default Value or Actual Value Valid Min Valid Max
solarwind
Flag indicating whether solar wind data are 'const' (constant) or 'var' (variable).
var
sw_source
Name of the spacecraft or data source used to generate solar wind input information. Currently one of ACE-RT ACE-L2, WIND, OMNI, DSCOVR (real time)
User-submitted data may be from any source or made-up. OMNI
despike_solar_wind_data
Flag indicating whether to automatically de-spike solar wind (optional for automatically retrieved data only; use when solar wind data shown in next page have clusters of extreme values in plasma density, temperature or velocity).
True
despike.threshold
De-spike threshold (standard deviations)
sigmas 2 4
despike.number_of_samples
De-spike length (number of samples in cluster of extreme values to be eliminated)
3 9
setting_option_for_Bx
Indicates how solar wind Bx is set: Set Bx to a specified constant ('user') Set Bx to the initial solar wind data value ('init') Use average Bx from solar wind data ('auto')
user
constant-Bx
Constant Bx value fed into the front boundary of the simulation.
nT 0
By-coefficient
Coefficient for By in linear combination approximating Bx: Bx ~ constant-Bx + By-coefficient*By + Bz-coefficient*Bz
0 -1 1
Bz-coefficient
Coefficient for Bz in linear combination approximating Bx: Bx ~ constant-Bx + By-coefficient*By + Bz-coefficient*Bz
0 -1 1
Bx
Sun-Earth component of solar wind magnetic field.
Bx is usually held constant (zero or average of observed values) to conserve div.B at the front boundary. Alternatively, oblique phase fronts can be assumed that update solar wind conditions along those fronts throughout the front boundary. Bx is then approximated as a linear combination of time dependent By and Bz nT 0.247 -100 100
By
Dawn-dusk component of solar wind magnetic field.
nT -4.729 -100 100
Bz
North-south component of the solar wind magnetic field. B_z is most important magnetic field component to drive or inhibit geomagnetic activity. Other components play a role in connection with the orientation of the Earth's dipole field.
nT 3.208 -100 100
Vx
Sun-Earth component of solar wind velocity.
Low solar wind speed (less than 200 km/s in magnitude) usually indicates poor statistics in the solar wind plasma measurements. km/s -287.547 -3000 -200
Vy
Plasma velocity in dawn-dusk direction.
The orbital velocity of Earth (about 29 km/s) is usually neglected km/s 11.469 -500 500
Vz
Solar wind plasma velocity in north-south direction.
km/s 102.9 -500 500
N
Solar wind plasma density.
Mass density described in terms of number of protons per cubic centimeter. AMU/cm^3 8.54 0.1 100
T
Solar wind plasma temperature.
Derived from observed distribution of solar wind particles. Can fluctuate widely when density N is at or below 1 AMU/cm^3. K 16258 10000 2000000
sw_link
Solar wind link
plot
SW_density_floor
Lowest value of N applied during pre-processing of solar wind input data.
The density floor in the solar wind varies by magnetosphere model and it's numerical stability. A similar floor may be imposed inside the magnetotail lobes where the density may drop lower than in the solar wind. AMU/cm^3 0.1 0.1 2.5
SW_density_floor_was_applied
Flag indicating the solar wind density has been floored with SW_density_floor value to ensure that the model will run through the requested time interval.
False
minimum_SW_Fast-Mode_mach_number
Minimum solar wind Fast-Mode mach number
1.76
SW_parameters_are_large
Flag indicating whether solar wind velocity, density or dynamic pressure are large. If they are, the run is a special request requiring attention by CCMC staff. The variables will be accepted unless they exceed certain absolute maximum values.
SW_plot
Name of solar wind plot
Baltazar_Gato_070924_1_sw.gif
Settings for the model
Settings for the model
Name Description Caveats Units Default Value or Actual Value Valid Min Valid Max
dipole_update
Flag indicating whether dipole updates throughout the run (True) or dipole set to start time of run (False)
True
dipole_time
dipole time
1998/01/06 14:00
dipole_tilt
dipole tilt
deg -14.602
dipole_tilt_y
Y component of dipole tilt
deg -0.570161
corotation
Flag indicating whether to enable corotation around fixed dipole orientation, yes or no
real
inflow boundary
Location of sun-ward facing (front) boundary of the magnetosphere simulation box.
R_E 0 24 128
grid
Grid definition referred to by number of cells. The grids for the different global magnetosphere models are listed in a file GM_grids.txt.
The design of SWMF grids is limitless and cannot be represented adequately with a single parameter. Quad grid with 96x96x128 cells overwiew grid with 755136 cells 1/8 R_E resolution dayside grid with 18,558,976 cells
run_type
Type of the run - either driven by real data or by artificial conditions
Driven by data
option_MAGNETOMETER
option_MAGNETOMETER
False
r_body
r_body
r_currents
r_currents
Ionosphere conductance model settings
Name Description Caveats Units Default Value or Actual Value Valid Min Valid Max
f10.7
Solar irradiation index as represented by the flux of 10.7 cm (2800 MHz) radiation from the Sun measured in units of 10−22 W⋅m−2⋅Hz−1.
Daily index of solar radiation that affects the daytime background conductivity in the ionosphere. sfu 84.1 50 300
iono_conductance
Parameter indicationg selection of conductance model in the ionosphere electrodynamics component of the model.
The two models offered for run-on-request are "constant" (user sets Pedersen Conductance and Hall Conductance) and "auroral" (conducances driven by f10.7 and field-aligned currents from magnetosphere part of the model). auroral
Pedersen Conductance
Value of constant user-selected Pedersen Conductance in the ionosphere.
S 1 100
Hall Conductance
Value of constant user-selected Hall Conductance in the ionosphere.
S 0 100

Run Access Information :

Keyword(s) :

January 6 1998

Linked to Parent Spase Resource(s) (example: SimulationModel) :

spase://CCMC/SimulationModel/MAGE/0.75

List of Publications Referencing this Run :

CMR Footer

Curator: Chiu Wiegand | NASA Official: Dr. Masha Kuznetsova | Privacy and Security Notices | Accessibility | CCMC Data Collection Consent Agreement