run_type |
Type of the run - either driven by real data or by artificial conditions |
|
|
Driven by data |
|
|
despike_solar_wind_data |
Flag indicating whether to automatically de-spike solar wind (optional for automatically retrieved data only; use when solar wind data shown in next page have clusters of extreme values in plasma density, temperature or velocity). |
|
|
False |
|
|
despike.threshold |
De-spike threshold (standard deviations) |
|
sigmas |
3 |
2 |
4 |
despike.number_of_samples |
De-spike length (number of samples in cluster of extreme values to be eliminated) |
|
|
5 |
3 |
9 |
setting_option_for_Bx |
Indicates how solar wind Bx is set: Set Bx to a specified constant ('user') Set Bx to the initial solar wind data value ('init') Use average Bx from solar wind data ('auto') |
|
|
user |
|
|
b_abs |
Magnitude of IMF |
|
|
6.58 |
|
|
b_angle |
IMF clock angle |
|
|
12.3 |
|
|
sw_link |
Solar wind link |
|
|
plot |
|
|
SW_density_floor_was_applied |
Flag indicating the solar wind density has been floored with SW_density_floor value to ensure that the model will run through the requested time interval. |
|
|
False |
|
|
minimum_SW_Fast-Mode_mach_number |
Minimum solar wind Fast-Mode mach number |
|
|
1.38 |
|
|
SW_parameters_are_large |
Flag indicating whether solar wind velocity, density or dynamic pressure are large. If they are, the run is a special request requiring attention by CCMC staff. The variables will be accepted unless they exceed certain absolute maximum values. |
|
|
|
|
|
SW_plot |
Name of solar wind plot |
|
|
Pauline_Dredger_101421_4_sw.gif |
|
|
dipole_update |
Flag indicating whether dipole updates throughout the run (True) or dipole set to start time of run (False) |
|
|
False |
|
|
dipole_time |
Dipole time |
|
|
2011/09/26 07:00 |
|
|
dipole_tilt |
Dipole tilt |
|
deg |
-10.5368 |
|
|
dipole_tilt_y |
Y component of dipole tilt |
|
deg |
-29.1027 |
|
|
corotation |
Flag indicating whether to enable corotation around fixed dipole orientation |
|
|
no |
|
|
Run_Ring_Current_Model_or_Not |
Flag indicating whether to run Ring Current Model |
|
|
False |
|
|
Calculate_Oval_Position_or_Not |
Flag indicating whether to run field line tracer to calculate polar cap (region with open field lines). |
|
|
True |
|
|
withRCM |
Flag indicating whether to use RCM inner magnetosphere model |
|
|
False |
|
|
withCIMI |
Flag indicating whether to use CIMI inner magnetosphere model |
|
|
False |
|
|
withCRCM |
Flag indicating whether to use CRCM inner magnetosphere model |
|
|
False |
|
|
withRBE |
Flag indicating whether to use RBE radiation belt model |
|
|
False |
|
|
Provide_Output_Along_Satellite_Trajectory |
Flag indicating whether to generate output files along the trajectory of the tracked satellites |
|
|
False |
|
|
Provide_CDF_Output_files |
Flag indicating whether to provide CDF output files |
|
|
False |
|
|
Provide_HDF_Output_files |
Flag indicating whether to generate HDF output files |
|
|
False |
|
|
Provide_MAGNETOMETER_Output_Files |
Flag indicating whether to generate magnetometer output files |
|
|
False |
|
|