CMR Header

CCMC Metadata Registry (CMR)

Menu Page

Go to:

CMR: View Simulation Run Info

OpenGGCM/5.0/ROR/Ewelina_Florczak_021021_5

Run Description

CCMC ROR run for OpenGGCM 5.0 with RORID Ewelina_Florczak_021021_5

Simulation Time:

Simulation Start Time: 2017-09-07T20:00:00Z
Simulation End Time: 2017-09-08T23:00:00Z
Time Step in second: 240
Simulation Time Description:
Simulation Time Caveats:

Temporal Dependence (whether the outputs of the simulation code are time-dependent?): true

Regions:

Earth.Magnetosphere

Simulation Domain :

Contacts :

Ewelina.Florczak, ModelUser

List of Run Input Parameter Grouping and their associated properties :

Name Description Caveats Properties
Settings for the model
Settings used to run the model
Name Description Caveats Units Default Value or Actual Value Valid Min Valid Max
RCM
Inner magnetosphere model options (with RCM or without RCM / CRCM)
despike_solar_wind_data
Flag indicating whether to automatically de-spike solar wind (optional for automatically retrieved data only; use when solar wind data shown in next page have clusters of extreme values in plasma density, temperature or velocity).
False
despike.threshold
De-spike threshold (standard deviations)
sigmas 3 2 4
despike.number_of_samples
De-spike length (number of samples in cluster of extreme values to be eliminated)
5 3 9
setting_option_for_Bx
Indicates how solar wind Bx is set:

Set Bx to a specified constant ('user')
Set Bx to the initial solar wind data value ('init')
Use average Bx from solar wind data ('auto')
init
b_abs
Magnitude of IMF
8.25
b_angle
IMF clock angle
83.97
sw_link
Solar wind link
plot
SW_density_floor_was_applied
Flag indicating the solar wind density has been floored with SW_density_floor value to ensure that the model will run through the requested time interval.
False
minimum_SW_Fast-Mode_mach_number
Minimum solar wind Fast-Mode mach number
1.24
SW_parameters_are_large
Flag indicating whether solar wind velocity, density or dynamic pressure are large. If they are, the run is a special request requiring attention by CCMC staff. The variables will be accepted unless they exceed certain absolute maximum values.
SW_plot
Name of solar wind plot
Ewelina_Florczak_021021_5_sw.gif
dipole_update
Flag indicating whether dipole updates throughout the run (True) or dipole set to start time of run (False)
False
dipole_time
Dipole time
2017/09/07 20:00
dipole_tilt
Dipole tilt
deg 12.54
dipole_tilt_y
Y component of dipole tilt
deg -15.5334
corotation
Flag indicating whether to enable corotation around fixed dipole orientation
no
Run_Ring_Current_Model_or_Not
Flag indicating whether to run Ring Current Model
False
Calculate_Oval_Position_or_Not
Flag indicating whether to run field line tracer to calculate polar cap (region with open field lines).
True
withRCM
Flag indicating whether to use RCM inner magnetosphere model
False
withCIMI
Flag indicating whether to use CIMI inner magnetosphere model	
False
withCRCM
Flag indicating whether to use CRCM inner magnetosphere model	
False
withRBE
Flag indicating whether to use RBE radiation belt model
False
Provide_Output_Along_Satellite_Trajectory
Flag indicating whether to generate output files along the trajectory of the tracked satellites
False
Provide_CDF_Output_files
Flag indicating whether to provide CDF output files
False
Provide_HDF_Output_files
Flag indicating whether to generate HDF output files
False
Provide_MAGNETOMETER_Output_Files
Flag indicating whether to generate magnetometer output files
False
run_type
Type of the run - either driven by real data or by artificial conditions
Driven by data
Solar wind inputs
Time-dependent solar wind plasma and magnetic field inputs.
Solar wind inputs are derived from a single spacecraft usually 200 R_E upstream of the sun-ward (front) simulation box boundary.
Name Description Caveats Units Default Value or Actual Value Valid Min Valid Max
solarwind
Flag indicating whether solar wind data are constant (initial values) or variable (var).
var const var
sw_source
Name of the spacecraft or data source used to generate solar wind input information. Currently one of ACE-RT ACE-L2, WIND, OMNI, DSCOVR (real time)
User-submitted data may be from any source or made-up. OMNI
constant-Bx
Constant Bx value fed into the front boundary of the simulation.
nT -0.857
By-coefficient
Coefficient for By in linear combination approximating Bx: Bx ~ constant-Bx + By-coefficient*By + Bz-coefficient*Bz
0 -1 1
Bz-coefficient
Coefficient for Bz in linear combination approximating Bx: Bx ~ constant-Bx + By-coefficient*By + Bz-coefficient*Bz
0 -1 1
Bx
Sun-Earth component of solar wind magnetic field.
Bx is usually held constant (zero or average of observed values) to conserve div.B at the front boundary. Alternatively, oblique phase fronts can be assumed that update solar wind conditions along those fronts throughout the front boundary. Bx is then approximated as a linear combination of time dependent By and Bz. nT -0.857 -100 100
By
Dawn-dusk component of solar wind magnetic field.
nT 8.204 -100 100
Bz
North-south component of the solar wind magnetic field. B_z is most important magnetic field component to drive or inhibit geomagnetic activity. Other components play a role in connection with the orientation of the Earth's dipole field.
nT 0.867 -100 100
Vx
Sun-Earth component of solar wind velocity.
Low solar wind speed (less than 200 km/s in magnitude) usually indicates poor statistics in the solar wind plasma measurements. km/s -497.605 -3000 -200
Vy
Plasma velocity in dawn-dusk direction.
The orbital velocity of Earth (about 29 km/s) is usually neglected. km/s 79.563 -500 500
Vz
Solar wind plasma velocity in north-south direction.
km/s 0.789 -500 500
N
Solar wind plasma density.
Mass density described in terms of number of protons per cubic centimeter. AMU/cm^3 4.418 0.1 100
T
Solar wind plasma temperature.
Derived from observed distribution of solar wind particles. Can fluctuate widely when density N is at or below 1 AMU/cm^3. K 198572 10000 2000000
SW density floor
Lowest value of N applied during pre-processing of solar wind input data.
The density floor in the solar wind varies by magnetosphere model and it's numerical stability. A similar floor may be imposed inside the magnetotail lobes where the density may drop lower than in the solar wind. AMU/cm^3 0.1 0.1 2.5
Ionosphere conductance model
Name Description Caveats Units Default Value or Actual Value Valid Min Valid Max
iono_conductance
Parameter indicationg selection of conductance model in the ionosphere electrodynamics component of the model.
The two models offered for run-on-request are constant (user sets Pedersen Conductance and Hall Conductance) and auroral (conducances driven by f10.7 and field-aligned currents from magnetosphere part of the model). auroral constant auroral
Pedersen Conductance
Value of constant user-selected Pedersen Conductance in the ionosphere.
S 1 100
Hall Conductance
Value of constant user-selected Hall Conductance in the ionosphere.
S 0 100
f10.7
Solar irradiation index as represented by the flux of 10.7 cm (2800 MHz) radiation from the Sun measured in units of 10−22 W⋅m−2⋅Hz−1.
Daily index of solar radiation that affects the daytime background conductivity in the ionosphere. sfu 130.4 50 300
Magnetosphere model parameters
Name Description Caveats Units Default Value or Actual Value Valid Min Valid Max
inflow boundary
Location of sun-ward facing (front) boundary of the magnetosphere simulation box.
R_E 33 24 128
grid
Magnetosphere grid
overview grid with 7M cells
Model outputs
Parameters that define the type of outputs generated and the frequency of outputs.
Name Description Caveats Units Default Value or Actual Value Valid Min Valid Max
satellite_names
Comma-separated list of satellite names
Satellite trajectories are obtained from SSCweb's Locator Tabular interface and are typically limited to missions in geospace. all satellites in SSCweb that are aloft at any time during a model run's time interval
SSCWeb_satellite_names
Comma-separated list of satellite names (single-word strings used in SSCweb).
Satellite trajectories are obtained from SSCweb's Locator Tabular interface and are typically limited to missions in geospace. all satellites in SSCweb that are aloft at any time during a model run's time interval
satellite_output_time_interval
Time interval between outputs during satellite tracking in the magnetosphere (or inner mangetosphere) model.
s 5 1 60

Run Access Information :

Keyword(s) :

OpenGGCM

Linked to Parent Spase Resource(s) (example: SimulationModel) :

spase://CCMC/SimulationModel/OpenGGCM/5.0

List of Publications Referencing this Run :

CMR Footer

Curator: Chiu Wiegand | NASA Official: Dr. Masha Kuznetsova | Privacy and Security Notices | Accessibility | CCMC Data Collection Consent Agreement