output_time_interval |
Time interval between outputs in the magnetosphere and ionosphere electrodynamics. |
Other components within a global magnetosphere modeling framework such as ring current or thermosphere model may have their own time scales. Output cadences may differ. |
s |
240 |
60 |
1800 |
satellite_output_time_interval |
Time interval between outputs during satellite tracking in the magnetosphere (or inner mangetosphere) model. |
|
s |
5 |
1 |
60 |
SSCWeb_satellite_names |
Comma-separated list of satellite names (single-word strings used in SSCweb). |
Satellite trajectories are obtained from SSCweb's Locator Tabular interface and are typically limited to missions in geospace. |
|
cluster1,geotail,goes13,goes14,goes15,goes16,mms1,themisa,themisb,themisc,themisd,themise |
|
all satellites in SSCweb that are aloft at any time during a model run's time interval |
MAGNETOMETERGRID |
Flag indicating the use of the SWMF model's calculation of ground magnetic perturbations on a grid of positions. |
Magnetic perturbations on the ground are calculated using Biot-Savart summation over electric currents on the magnetosphere and ionosphere electrodynamics grids. magnetic-field=aligned currents between ionosphere electrodynamics and magnetosphere are assumed to flow on dipole magnetic field lines. The calculation assumes stationary conditions (infinite speed of light) and does not take into account induction effects due to the Earth's electric ground conductivity. |
|
false |
false |
true |
coord_MAGNETOMETERGRID |
Coordinate system used in the grid of positions on the ground.
This is either GEO (geographic) or MAG (geomagnetic). |
|
|
GEO |
GEO |
MAG |
latmin_MAGNETOMETERGRID |
Minimum latitude of the position grid used to calculate ground magnetic perturbations. |
|
degrees |
-90 |
-90 |
90 |
latmax_MAGNETOMETERGRID |
Maximum latitude of the position grid used to calculate ground magnetic perturbations. |
|
degrees |
90 |
-90 |
90 |
lonmin_MAGNETOMETERGRID |
Minimum longitude of grid used to calculate ground magnetic perturbations. |
|
degrees |
0 |
0 |
360 |
lonmax_MAGNETOMETERGRID |
Maximum longitude of grid used to calculate ground magnetic perturbations. |
|
degrees |
360 |
0 |
360 |
dlat_MAGNETOMETERGRID |
Latitude spacing in grid used to calculate ground magnetic perturbations. |
|
degrees |
5 |
1 |
180 |
dlon_MAGNETOMETERGRID |
Longitude spacing in grid used to calculate ground magnetic perturbations. |
|
degrees |
5 |
1 |
360 |
dtsave_MAGNETOMETERGRID |
Time interval between calculation and output of ground magnetic perturbations. |
|
s |
60 |
5 |
300 |
satellite_names |
Comma-separated list of satellite names |
Satellite trajectories are obtained from SSCweb's Locator Tabular interface and are typically limited to missions in geospace. |
|
Cluster-1 (FM5/Rumba),Geotail,GOES-13,GOES-14,GOES-15,GOES-16,MMS 1,THEMIS-A (P5),THEMIS-B (P1),THEMIS-C (P2),THEMIS-D (P3),THEMIS-E (P4) |
|
all satellites in SSCweb that are aloft at any time during a model run's time interval |
Provide_Output_Along_Satellite_Trajectory |
Flag indicating whether to generate output files along the trajectory of the tracked satellites |
|
|
True |
|
|
dnsave_MAGNETOMETERGRID |
Number of steps between outputs when calculating magnetic perturbations on grid of locations |
Currently unused |
|
|
|
|
Provide_CDF_Output_files |
Flag indicating whether to provide CDF output files |
This is a post-processing option within the CCMC run-on-request workflow. The option does not affect how the model itself runs. |
|
False |
|
|
Provide_HDF_Output_files |
Flag indicating whether to generate HDF output files |
This is a post-processing option within the CCMC run-on-request workflow. The option does not affect how the model itself runs. |
|
False |
|
|
Provide_MAGNETOMETER_Output_Files |
Flag indicating whether to generate magnetometer output files |
|
|
True |
|
|
Calculate_Oval_Position_or_Not |
Flag indicating whether to run field line tracer to calculate polar cap (region with open field lines). |
This is a post-processing option within the CCMC run-on-request workflow.
The option does not affect how the model itself runs. |
|
True |
|
|